Directory - Sandvik Mining and Rock Technology

Level 1, 50 McDougall Street
Milton
QLD Australia 4064

P: 07 3637 7400

Recent New Products
Show all 17 New Products »
Sandvik’s CI732 horizontal impact crusher provides operators with a sturdy, economic and easy to use crusher.
 
The CH500 series of cone crushers are considered a cost-efficient option for any operation that is keen to increase production capacity and improve the quality of its end product.
 
With advanced membrane technology and idle blow protection, the Rammer 4099 is purpose-matched to individual applications.
 
The QJ341+ jaw crusher comes with a double-deck pre-screen as standard.
 
Sandvik’s HX900 wear segments are made from a hard material suitable for tough environments.
Profile
Sandvik Mining and Sandvik Construction is part of the Sandvik Group - a global industrial concern with advanced products and world-leading positions in key areas.

Sandvik Mining and Sandvik Construction Sales Area Australia, NZ, Freeport

Sandvik Mining and Sandvik Construction Sales Area Australia is responsible for the marketing, distribution, service and support of Sandvik mining and construction products throughout Australia, New Zealand and Freeport.

At Sandvik Mining and Sandvik Construction - Environment, Health and Safety (EHS) is our first priority, and we are committed to operating a zero harm organisation. That means when you deal with Sandvik Mining and Sandvik Construction, you can be confident that we will strive to always provide the systems and environment to protect our employees, our customers, suppliers and subcontractors.

We are a major supplier of mining equipment to the resources sectors throughout our Region, including products for surface mining, underground mining (coal and metals), bulk materials transportation, bulk materials handling, and exploration. We are also the largest supplier of Australian made mining equipment.

In the quarrying industry, we supply a wide range of products, including drill rigs, breakers, crushers, screens, conveyors, drill consumables and turn key plants.

In the construction industry, we are a leading supplier of hydraulic breakers and other attachments, as well as mobile crushing equipment, construction drills and tunnelling equipment.

Throughout Australia, New Zealand and Freeport, we employ approximately 1800 employees, in over 50 strategically located facilities allowing us to deliver the highest levels of service and support.

When it comes to servicing and supporting Sandvik Mining and Sandvik Construction equipment, our highly skilled, factory-trained technicians recognise that our business revolves around our customers. Working out of facilities around Australia, using state-of-the-art workshops and vehicles, our customers rely on Sandvik to deliver quality service and support, backed by our global resources.

Categories
Air Separators

Belt Cleaners

Belts

Blending/Loading Systems

Breakers - Concrete

Buckets & Attachments

Construction Plant & Equipment

Consumables - Blow Bars

Consumables - Ceramic Wear Parts

Consumables - Drilling Related

Consumables - GET

Consumables - Jaw Plates

Consumables - Liners

Consumables - Safe Wear Part Lifting Devices

Consumables - Screens/Wire Mesh

Consumables - Wear Plates

Conveyors/Conveying Equipment

Crushers Plant & Equipment

Demolition Shears

Diamond Drilling

Drilling Rigs

Dust Control Systems

Dust Extraction/Suppression

Education & Training

Exploration & Geophysics

Feeders/Feeding Equipment

Hammers

Loaders

Materials Handling

Mobile Crushers

Mobile Screens

Modular Plant

Plant Design

Recycling

Rollers

Rubber & PVC

Screening Plant & Equipment

Spare Parts

Stackers

Vibratory Equipment


Brands

Quarry
Sandvik
Showroom
Videos
Instagram
Sandvik Coromant
221 31.1K 7.9M
This is the official YouTube Channel of Sandvik Coromant - the world’s leading supplier of tools, tooling solutions and know-how to the metalworking industry. With extensive investments in research and development we create unique innovations and set new productivity standards together with our customers. These include the world's major automotive, aerospace and energy industries.
01:51
Hard part turning - New generation CBN grades
18/10/2018
The new CBN grades, CB7105, CB7115, CB7125 and CB7135, are designed to break new ground in hard part turning. These CBN grades are specifically designed to handle the machining challenges in Automotive transmission applications. They are optimized for light to heavy interrupted cuts and deliver long
9.9K
8
04:20
Tips film #42: Optimizing roughing operations with solid carbide end mills
10/10/2018
A successful roughing operation includes fast and efficient removal of large amount of material. In this film we examine two milling methods for roughing with solid carbide end mills: conventional slot milling and high-feed side milling. We analyze how these methods work and why one of them is the
4.2K
3
03:28
High feed side milling in titanium alloys - CoroMill® 316 for ISO S
8/10/2018
Repost due to correction of cutting data. As titanium becomes increasingly prevalent in aerospace components, the demand for optimized tools grows. CoroMill® 316 exchangeable-head end mill optimized for high feed side milling of titanium alloys has been developed to meet these demands. It is perfec
4.4K
7
03:22
High speed roughing in HRSA with ceramic CoroMill® Plura and CoroMill®316
4/10/2018
Ceramic end mills offer a more productive method for machining nickel based alloys than standard carbide end mills. CoroMill® Plura solid ceramic end mills and CoroMill® 316 brazed ceramic heads are optimized for side milling and face milling in nickel based alloys, offering a productive solution fo
10.8K
19
01:40
Hard part turning with CB7125 and CB7135
2/10/2018
For everybody working with automotive transmission and hard part turning, there is a reason to choose our new generation CBN grades - CB7125 and CB7135. They are optimized for medium to heavy interrupted cuts. They deliver longer and more stable tool life, good surface finish and consistent dimensio
34K
15
02:08
Non-linear profiling with CoroCut® QF
1/10/2018
Non-linear tool path profiling distributes wear along the cutting edge to maximize tool life. The method ensures good chip control and chip breaking, ideal when process security is more important than productivity. CoroCut QF face grooving system offers very high stability also when using long and
6.2K
3
04:11
Tips film #41 - Analyze tool wear in solid carbide drilling
21/09/2018
The goal in solid carbide drilling is to obtain a balanced wear across the drill’s cutting edge. Uneven tool wear indicates a problem in the drilling process that can result in shorter tool life, tool breakage and damaged components. In this film, we demonstrate how to identify tool wear problems an
4.8K
8
01:34
Increase equipment efficiency with CoroPlus® MachiningInsights
11/09/2018
Planning for availability in a workshop requires transparency of all manufacturing operations. While manual collection of machine tool data and documentation become tedious and time-consuming, a connected machine offers possibilities for transparency, optimized planning and streamlined production.
2.6K
1
01:49
Control machining processes with CoroPlus® ProcessControl
15/06/2018
Unwanted deviances in your machining processes can lead to damaged cutting tools, machine tool and/or workpiece. In a controlled machining process where decisions and actions are based on real-time information and facts, manufacturers are able to optimize their processes and significantly reduce the
6.6K
5
04:48
It shouldn’t be that easy to cut metal - Y-axis parting off
7/09/2018
To truly advance parting off operations, it is not enough to develop the tool - you need to develop the method. Meet Staffan Lundström and Johan Anderstedt from Sandvik Coromant, the developers behind Y-axis parting. Watch their journey from first idea at the drawing board to initial tests and final
6.8K
15
03:29
How to improve chip control in turning operations - Tips film #40
23/05/2018
Chip control and chip jamming present major challenges for turning operations. It can lead to reduced workpiece quality, scrapped components, wasted material, shorter tool life, and machine stoppage. If this a primary concern for your machine shop then make sure to watch this film where we demonstra
11.2K
4
02:44
PrimeTurning™ triples productivity in turning at Godrej Aerospace
21/05/2018
When faced with a large order and a difficult-to-machine steel grade, Godrej Aerospace, an Indian aerospace component manufacturer found their answer in PrimeTurning™. Find out how PrimeTurning™ helped increase productivity and reduce cycle time. To read the full story please visit: https://www.san
7.8K
5
02:03
Shaping the future together
17/05/2018
Engineering, it can change the world. This film is a tribute to all of you working hard within the engineering industry, your relentless work to constantly push for industrial progress and for shaping the future together.
25.7K
6
03:15
How to recycle solid carbide with Sandvik Coromant
3/05/2018
The cemented carbide that Sandvik Coromant uses comes from our customers, who make revenue by selling us their worn inserts and round tools. Regardless of origin, we purchase the tools at the going market price. We leave recycling bins at your premises. You fill the bins. We retrieve them with c
52K
45
02:04
BT30 integrated tool holders
12/04/2018
An illustration of the effect of too long a gauge line. Using any type of chuck, the gauge line or programming length on BT30 machines creates vibration in milling. The integrated BT30 with Coromant EH coupling and CoroMill® 316 managed 4.5 times higher depth of cut, improving metal cutting efficien
21.2K
19
01:43
Machining of internal gear - Power skiving
20/03/2018
This demonstration shows machining of internal gears with power skiving and CoroMill® 180. Power skiving is a continuous cutting process that enables machining to be carried out in a single setup. The possibility to machine the complete component in a multi-task machine or machining centre in one si
29.7K
22
01:30
CoroTurn® Prime SL head – Internal turning with excellent chip evacuation
14/03/2018
With the advent of CoroTurn® Prime SL head, it is now possible to use PrimeTurning™ methodology for internal turning applications. The inside-out machining capability allows for an excellent chip evacuation and chip control. In addition, this new CoroTurn® Prime SL head solution produces an excellen
16.7K
7
01:20
CoroThread® 266 - Thread turning with precision coolant
15/03/2018
This demo shows thread turning with CoroThread 266 - now featuring precision over and under coolant. Precision coolant from above controls the chip breaking for secure machining, while under coolant controls the temperature for long and predictable tool life. This paves the way for higher machining
15K
5
01:55
Demo: Face grooving with CoroCut QF
8/03/2018
This demo features CoroCut QF - a system exclusively developed for secure face grooving. Workpiece material: Low-alloy steel SS 2541 (34CrNiMoS6), HB 280 The film demonstrates how precision coolant supply improves chip evacuation and decreases the risk for chip jamming, critical factors for success
9.7K
4
03:28
Groove milling with different CoroMill 331® insert alternatives
12/03/2018
This machining demonstration shows different insert geometries in a groove milling operation. The tool is CoroMill® 331, a multi-purpose side and face milling cutter with high precision and productivity capabilities.
13.4K
7
01:34
CoroTap® 400 - Forming tap for machining in ISO P
7/03/2018
Designed for high-speed tapping in steel, the chip-free forming tap CoroTap™ 400 features a new grade and coating,delivering superior thread quality at higher cutting speeds with improved tool life.
12.2K
7
01:11
Rough boring with long overhang
9/03/2018
This film shows CoroBore BR20®, a twin-edged rough boring solution. The damped version of CoroBore BR20 with Silent Tools™ technology that is used in this film is a productivity booster when working with long overhangs or when extra stability is required.
11.9K
4
01:07
Rough back boring with CoroBore® BR10
9/03/2018
This film shows back boring with CoroBore® BR10. CoroBore BR10 for rough back boring is based on the CoroBore BR20 adaptor together with a unique back boring slide and cover.
3.5K
0
01:03
CoroCut® 1-2 – XB – High feed concept for hard part turning
1/03/2018
Achieving productivity targets when manufacturing automotive transmission components has now become significantly easier. The -XB geometry features a special grinded edge profile that allows for machining at very high feed rates, up to 1.2 mm/rev (0.047 in/rev). This results in higher productivity f
9.9K
5
03:00
Tooling certificates - Sandvik Coromant US
8/02/2018
During the machine purchase process, tooling is an often-overlooked piece of the puzzle. By thinking about the tooling right from the start, however, shops can cut machine-payback time by as much as an entire year. See how tooling certificates streamline the new machine purchasing process.
3.3K
0
03:45
How to achieve good chip formation in indexable drilling - Tips film #39
15/11/2017
Learn how to achieve good chip control when drilling with indexable drills. Effective chip control is the most important factor in indexable insert drilling operations and is essential for quality hole making. Poor chip evacuation can result in poor surface finish and can lead to tool breakage and d
15.1K
8
01:55
Demo - Drilling with exchangeable tip drill CoroDrill® 870
9/11/2017
This film demonstrates drilling peformance of the exchangeable tip drill CoroDrill® 870 that saves time, increases productivity and reduces cost per hole. The drill is designed to optimize drilling applications through diameter range, steps and length possibilities for the H9-H10 hole-tolerance area
23.6K
16
03:09
Machining in a new direction – PrimeTurning™ by Sandvik Coromant
13/11/2017
Turning is a mature machining process that has seemingly been around forever. But what if there was something that could deliver genuine competitive gain? To make such a leap, the very principles of conventional turning would have to be challenged. This is the exact thinking applied by experts from
20.7K
13
02:11
PrimeTurning™ – Machining of wheel stub with CoroTurn® Prime Twin tool holder
3/10/2017
Modern multi-task machines are intended for the complete machining of components but typically have a very slow tool changing time. The new CoroTurn® Prime Twin-tool saves you time when changing tools to increase machining utilization and productivity.
38.9K
17
01:02
Demo: Three times higher feed rate with Y-axis parting
5/10/2017
This demo film shows Y-axis parting with CoroCut® QD. This completely new way of parting off gives higher stability and less vibration which allows for much higher feed rates compared to the conventional method. About y-axis parting: Conventional parting off only uses feed motion along the X-axis.
46K
38