Search Stories by: 
&/or
 

Geology Talk, Geology, Load & Haul, Plant & Equipment

Articles from LOADERS (444 Articles), EXPLORATION & GEOPHYSICS (87 Articles), SURVEYING EQUIPMENT (78 Articles)

About 85 per cent of the aggregate produced by Front Range Aggregates leaves the plant by rail.
About 85 per cent of the aggregate produced by Front Range Aggregates leaves the plant by rail.
 










R is for Rocksicle

On his circuit of the A-Z of quarrying terms, Bill Langer visits a Colorado aggregate rail operation to learn how it manages and transports its end product and ensures the aggregate does not freeze into “rocksicles”.

Not too long ago I had the opportunity to visit an aggregate operation along the Arkansas River, just upstream from Cañon City, Colorado. About 85 per cent of the material produced at the plant leaves by rail.

Although I went to see the geology, I was fascinated by some of the intricacies of how rock is shipped by rail. Besides that, I thought I might catch a glimpse of the dreaded rocksicle.

I joined up with Mike and Terry, who showed me around their operation. The first thing I noticed when we entered the pit were humungous boulders, some over three metres (or almost ten feet) in diameter, strewn all over the place.

Terry must have seen my strange expression because he politely commented that the previous owners of the operation didn’t have a real good handle on what they were doing. It was no surprise to learn that the operation was bought out of bankruptcy in 2003. Which brings me to the following lessons below.

Lesson 1. A rail-base operation can fail in good times (early 2000s) if it is not managed well, and can survive in bad times (2008 until now) if it is managed well.

Mike pointed out that when his people weren’t working the pit face, they were setting aside some boulders for sale as landscaping material, and breaking and crushing others for use as aggregate. But getting the operation back on track was more difficult than just shoving around boulders.

Negative experiences with the previous owners left customers, vendors, permitting and regulatory staff, and local citizen groups extremely sceptical about how the operation would function under the new owners. It had taken years of responsible operations and intense community interactions  to regain the confidence of those whose trust had been lost by the previous owners.

Lesson 2: Earning a social licence to mine can be a very complicated, time-consuming exercise.

Loading and emptying rail cars is capital intensive. Their loadout facility is very simple – a spur (track) to the facility, two front-end loaders, a hopper, scale, and conveyor. The cost is $US1.25 million, not counting the track. Mike has permits for a new distribution yard in the south Denver metro area where anticipated demand is expected to require significant imports of aggregate. The cost is $US2.5 million just for the off-loading facility.

Lesson 3: The choice between rail and truck transportation methods involves trade- offs between expenditures of investment capital and operating expenses, flexible systems versus fixed route systems, high volume shipments versus individual shipments, and transport distances.

I noticed that each car was being loaded with 38.1mm minus 19mm (1½” - ¾”) crushed rock, prepared specifically for use as ASTM # 4A ballast rock. The cars can apply ballast directly to the rail bed, thus eliminating the need for an off-loading facility. The ballast was granite, which was the preferred rock for the intended application, and is sufficiently durable that it does not deteriorate during transport. Also, there were sufficient stockpiles to immediately meet the need.

Lesson 4: Transportation management is geared toward providing the customer with the right product, arriving in the right condition, at the right time, at the right place, at the right price.

We stopped at the plant office just before I left. Terry started to check the forecast temperatures along the route from the operation to their distribution yard in Colorado Springs. I asked “Why?” The answer – they were shipping washed rock, and if it got below freezing for too long a time the wet rock would freeze into a solid lump, and the rail car would remain out of commission until spring.

Lesson 5: Rocksicle.

Author’s Note: My thanks to Mike Sheahan, president and CEO of Front Range Aggregates and Terry Tew, plant manager, for sharing their insights on shipping aggregate by rail.










ABOUT THE AUTHOR
Bill Langer
Independent Research Geologist

Bill Langer is a freelance writer and retired Senior Research Geologist for the U.S. Geological Survey. Bill is now an independent researcher specialising in aggregate resources. Click here to email Bill or visit his website.








Wednesday, 22 May, 2019 5:18am
login to my account
Username: Password:
Skyscraper 2
advertisement
Free Sign Up

Receive FREE newsletter and alerts


CONNECT WITH US
Display 1
advertisement
Skyscraper 3
advertisement