Directory - Sandvik Mining and Rock Technology

60 - 62 Qantas Drive
Brisbane Airport 
QLD Australia 4009

P: 07 3637 7400
F: 07 3368 2532

Recent New Products
Show all 17 New Products »
Sandvik’s CI732 horizontal impact crusher provides operators with a sturdy, economic and easy to use crusher.
 
The CH500 series of cone crushers are considered a cost-efficient option for any operation that is keen to increase production capacity and improve the quality of its end product.
 
With advanced membrane technology and idle blow protection, the Rammer 4099 is purpose-matched to individual applications.
 
The QJ341+ jaw crusher comes with a double-deck pre-screen as standard.
 
Sandvik’s HX900 wear segments are made from a hard material suitable for tough environments.
Profile
Sandvik Mining and Sandvik Construction is part of the Sandvik Group - a global industrial concern with advanced products and world-leading positions in key areas.

Sandvik Mining and Sandvik Construction Sales Area Australia, NZ, Freeport

Sandvik Mining and Sandvik Construction Sales Area Australia is responsible for the marketing, distribution, service and support of Sandvik mining and construction products throughout Australia, New Zealand and Freeport.

At Sandvik Mining and Sandvik Construction - Environment, Health and Safety (EHS) is our first priority, and we are committed to operating a zero harm organisation. That means when you deal with Sandvik Mining and Sandvik Construction, you can be confident that we will strive to always provide the systems and environment to protect our employees, our customers, suppliers and subcontractors.

We are a major supplier of mining equipment to the resources sectors throughout our Region, including products for surface mining, underground mining (coal and metals), bulk materials transportation, bulk materials handling, and exploration. We are also the largest supplier of Australian made mining equipment.

In the quarrying industry, we supply a wide range of products, including drill rigs, breakers, crushers, screens, conveyors, drill consumables and turn key plants.

In the construction industry, we are a leading supplier of hydraulic breakers and other attachments, as well as mobile crushing equipment, construction drills and tunnelling equipment.

Throughout Australia, New Zealand and Freeport, we employ approximately 1800 employees, in over 50 strategically located facilities allowing us to deliver the highest levels of service and support.

When it comes to servicing and supporting Sandvik Mining and Sandvik Construction equipment, our highly skilled, factory-trained technicians recognise that our business revolves around our customers. Working out of facilities around Australia, using state-of-the-art workshops and vehicles, our customers rely on Sandvik to deliver quality service and support, backed by our global resources.

Categories
Air Separators

Belt Cleaners

Belts

Blending/Loading Systems

Breakers - Concrete

Buckets & Attachments

Construction Plant & Equipment

Consumables - Blow Bars

Consumables - Ceramic Wear Parts

Consumables - Drilling Related

Consumables - GET

Consumables - Jaw Plates

Consumables - Liners

Consumables - Safe Wear Part Lifting Devices

Consumables - Screens/Wire Mesh

Consumables - Wear Plates

Conveyors/Conveying Equipment

Crushers Plant & Equipment

Demolition Shears

Diamond Drilling

Drilling Rigs

Dust Control Systems

Dust Extraction/Suppression

Education & Training

Exploration & Geophysics

Feeders/Feeding Equipment

Hammers

Loaders

Materials Handling

Mobile Crushers

Mobile Screens

Modular Plant

Plant Design

Recycling

Rollers

Rubber & PVC

Screening Plant & Equipment

Spare Parts

Stackers

Vibratory Equipment


Brands

Quarry
Sandvik
Showroom
Videos
Instagram
Sandvik Coromant
214 26.1K 7.1M
This is the official YouTube Channel of Sandvik Coromant - the world’s leading supplier of tools, tooling solutions and know-how to the metalworking industry. With extensive investments in research and development we create unique innovations and set new productivity standards together with our customers. These include the world's major automotive, aerospace and energy industries.
03:29
How to improve chip control in turning operations - Tips film #40
23/05/2018
Chip control and chip jamming present major challenges for turning operations. It can lead to reduced workpiece quality, scrapped components, wasted material, shorter tool life, and machine stoppage. If this a primary concern for your machine shop then make sure to watch this film where we demonstra
2.2K
1
02:44
PrimeTurning™ triples productivity in turning at Godrej Aerospace
21/05/2018
When faced with a large order and a difficult-to-machine steel grade, Godrej Aerospace, an Indian aerospace component manufacturer found their answer in PrimeTurning™. Find out how PrimeTurning™ helped increase productivity and reduce cycle time. To read the full story please visit: https://www.san
3.2K
4
02:03
Shaping the future together
17/05/2018
Engineering, it can change the world. This film is a tribute to all of you working hard within the engineering industry, your relentless work to constantly push for industrial progress and for shaping the future together.
2.6K
3
03:15
How to recycle solid carbide with Sandvik Coromant
3/05/2018
The cemented carbide that Sandvik Coromant uses comes from our customers, who make revenue by selling us their worn inserts and round tools. Regardless of origin, we purchase the tools at the going market price. We leave recycling bins at your premises. You fill the bins. We retrieve them with c
24.2K
10
02:04
BT30 integrated tool holders
12/04/2018
An illustration of the effect of too long a gauge line. Using any type of chuck, the gauge line or programming length on BT30 machines creates vibration in milling. The integrated BT30 with Coromant EH coupling and CoroMill® 316 managed 4.5 times higher depth of cut, improving metal cutting efficien
16.7K
16
01:43
Machining of internal gear - Power skiving
20/03/2018
This demonstration shows machining of internal gears with power skiving and CoroMill® 180. Power skiving is a continuous cutting process that enables machining to be carried out in a single setup. The possibility to machine the complete component in a multi-task machine or machining centre in one si
19.5K
20
01:30
CoroTurn® Prime SL head – Internal turning with excellent chip evacuation
14/03/2018
With the advent of CoroTurn® Prime SL head, it is now possible to use PrimeTurning™ methodology for internal turning applications. The inside-out machining capability allows for an excellent chip evacuation and chip control. In addition, this new CoroTurn® Prime SL head solution produces an excellen
13.5K
5
01:20
CoroThread® 266 - Thread turning with precision coolant
15/03/2018
This demo shows thread turning with CoroThread 266 - now featuring precision over and under coolant. Precision coolant from above controls the chip breaking for secure machining, while under coolant controls the temperature for long and predictable tool life. This paves the way for higher machining
13.1K
5
01:55
Demo: Face grooving with CoroCut QF
8/03/2018
This demo features CoroCut QF - a system exclusively developed for secure face grooving. The film demonstrates how precision coolant supply improves chip evacuation and decreases the risk for chip jamming, critical factors for successful deep face grooving operations. It also shows CoroCut QF in c
6K
2
03:28
Groove milling with different CoroMill 331® insert alternatives
12/03/2018
This machining demonstration shows different insert geometries in a groove milling operation. The tool is CoroMill® 331, a multi-purpose side and face milling cutter with high precision and productivity capabilities.
11.1K
7
01:34
CoroTap® 400 - Forming tap for machining in ISO P
7/03/2018
Designed for high-speed tapping in steel, the chip-free forming tap CoroTap™ 400 features a new grade and coating,delivering superior thread quality at higher cutting speeds with improved tool life.
10.9K
7
01:11
Rough boring with long overhang
9/03/2018
This film shows CoroBore BR20®, a twin-edged rough boring solution. The damped version of CoroBore BR20 with Silent Tools™ technology that is used in this film is a productivity booster when working with long overhangs or when extra stability is required.
10.6K
4
01:07
Rough back boring with CoroBore® BR10
9/03/2018
This film shows back boring with CoroBore® BR10. CoroBore BR10 for rough back boring is based on the CoroBore BR20 adaptor together with a unique back boring slide and cover.
3.1K
1
01:03
CoroCut® 1-2 – XB – High feed concept for hard part turning
1/03/2018
Achieving productivity targets when manufacturing automotive transmission components has now become significantly easier. The -XB geometry features a special grinded edge profile that allows for machining at very high feed rates, up to 1.2 mm/rev (0.047 in/rev). This results in higher productivity f
8.4K
5
03:00
Tooling certificates - Sandvik Coromant US
8/02/2018
During the machine purchase process, tooling is an often-overlooked piece of the puzzle. By thinking about the tooling right from the start, however, shops can cut machine-payback time by as much as an entire year. See how tooling certificates streamline the new machine purchasing process.
2.7K
0
03:45
How to achieve good chip formation in indexable drilling - Tips film #39
15/11/2017
Learn how to achieve good chip control when drilling with indexable drills. Effective chip control is the most important factor in indexable insert drilling operations and is essential for quality hole making. Poor chip evacuation can result in poor surface finish and can lead to tool breakage and d
12.4K
8
01:55
Demo - Drilling with exchangeable tip drill CoroDrill® 870
9/11/2017
This film demonstrates drilling peformance of the exchangeable tip drill CoroDrill® 870 that saves time, increases productivity and reduces cost per hole. The drill is designed to optimize drilling applications through diameter range, steps and length possibilities for the H9-H10 hole-tolerance area
20K
14
03:09
Machining in a new direction – PrimeTurning™ by Sandvik Coromant
13/11/2017
Turning is a mature machining process that has seemingly been around forever. But what if there was something that could deliver genuine competitive gain? To make such a leap, the very principles of conventional turning would have to be challenged. This is the exact thinking applied by experts from
17.7K
13
02:11
PrimeTurning™ – Machining of wheel stub with CoroTurn® Prime Twin tool holder
3/10/2017
Modern multi-task machines are intended for the complete machining of components but typically have a very slow tool changing time. The new CoroTurn® Prime Twin-tool saves you time when changing tools to increase machining utilization and productivity.
31.3K
16
01:02
Demo: Three times higher feed rate with Y-axis parting
5/10/2017
This demo film shows Y-axis parting with CoroCut® QD. This completely new way of parting off gives higher stability and less vibration which allows for much higher feed rates compared to the conventional method. About y-axis parting: Conventional parting off only uses feed motion along the X-axis.
37.7K
35
01:41
CoroMill Plura HF titanium pocketing
4/10/2017
Designed specifically for reliable and productive milling of titanium and nickel based alloys, CoroMill® Plura milling cutters feature two end mills optimized for titanium alloys (one solid and one with internal coolant booster) and one for nickel alloys.
10.2K
0
01:34
CoroDrill 880 CVD diamond-coated insert grades for ISO N machining
4/10/2017
Making holes in aluminium can be a challenging task. CVD diamond-coated insert grades N124 and N134 feature an insert coating with the super-hardness of a real crystalline diamond. Together with chip breaker designs and a unique geometry the inserts guarantee a superior drilling performance.
10.1K
5
01:25
Advanced machining with CoroPlus® tooling solutions
22/09/2017
Connected tooling solutions and process monitoring enable you to leverage data to make the right, fact-based decisions and reach more productive machining. CoroPlus solutions allow you to monitor your machining processes, get real-time insights from within your component and remotly adjust cutting
9.6K
5
01:22
Tool and cutting data recommendation with CoroPlus ToolGuide
7/07/2017
Get a tool recommendation including speeds and feeds based on the task that you are performing. Utilise the connectivity of CoroPlus to import the speeds and feeds into your CAM software or Tool data management system through the click of a button.
5.9K
2
01:27
Creating tool assembly with CoroPlus® ToolLibrary
4/07/2017
Get a tool recommendation including speeds and feeds based on the task that you are performing. Create your tool assembly based on that recommendation. Your tool assembly is based on the ISO 13399 tool data standard and is ready for import to your CAM software.
3.6K
3
01:17
Make the right design and planning decisions with CoroPlus®
3/07/2017
Speed up your decision making and verify the quality of your work in operation and process planning. CoroPlus® ToolGuide gives you tool recommendations and speeds and feeds for a given machining task. Send the tool items to CoroPlus® ToolLibrary for quick and easy tool assembly. All tool data is
9.1K
2
01:04
Face milling demo with steel workpiece - Sandvik Coromant
27/06/2017
Note: there is a typo in the imperial Q value displayed in the film. The correct value is 31.06 inch³. In this face milling demonstration, CoroMill 745 multi-edge cutter with high feed capability is used for steel machining. The cutter version that is used has a 25 degree entering angle, giving opp
4.9K
6
00:50
Cast iron face milling demo - Sandvik Coromant
27/06/2017
Note: there is a typo in the imperial Q value displayed in the film. The correct value is 54.62 inch³. CoroMill 745 multi-edge cutter with high feed capability is in this demonstration used for face milling in cast iron. The 25 degree entering angle of this cutter version allows for high feed milli
8.7K
1
02:36
Mastercam 2018 connects with CoroPlus ToolLibrary
15/06/2017
The Mastercam 2018 CAM software includes an interface to CoroPlus ToolLibrary. This enables users to search and use simple filter commands to find and select tools from ISO 13399 standard catalogues, says Stas Mylek, Senior Product Marketing at Mastercam. The CAM programmer will be able to create
10.9K
4
00:37
All directional profiling and finishing demo - CoroTurn® Prime A-type
1/06/2017
CoroTurn Prime A-type tool with three 35° corners is designed for light roughing, finishing and profiling giving excellent chip control and significant productivity.
5.3K
0