Directory - Sandvik Mining and Rock Technology

60 - 62 Qantas Drive
Brisbane Airport 
QLD Australia 4009

P: 07 3637 7400
F: 07 3368 2532

Recent New Products
Show all 16 New Products »
The CH500 series of cone crushers are considered a cost-efficient option for any operation that is keen to increase production capacity and improve the quality of its end product.
 
With advanced membrane technology and idle blow protection, the Rammer 4099 is purpose-matched to individual applications.
 
The QJ341+ jaw crusher comes with a double-deck pre-screen as standard.
 
Sandvik’s HX900 wear segments are made from a hard material suitable for tough environments.
 
Sandvik has added a new radio remote control option to its Ranger series of surface top hammer drill rigs.
Profile
Sandvik Mining and Sandvik Construction is part of the Sandvik Group - a global industrial concern with advanced products and world-leading positions in key areas.

Sandvik Mining and Sandvik Construction Sales Area Australia, NZ, Freeport

Sandvik Mining and Sandvik Construction Sales Area Australia is responsible for the marketing, distribution, service and support of Sandvik mining and construction products throughout Australia, New Zealand and Freeport.

At Sandvik Mining and Sandvik Construction - Environment, Health and Safety (EHS) is our first priority, and we are committed to operating a zero harm organisation. That means when you deal with Sandvik Mining and Sandvik Construction, you can be confident that we will strive to always provide the systems and environment to protect our employees, our customers, suppliers and subcontractors.

We are a major supplier of mining equipment to the resources sectors throughout our Region, including products for surface mining, underground mining (coal and metals), bulk materials transportation, bulk materials handling, and exploration. We are also the largest supplier of Australian made mining equipment.

In the quarrying industry, we supply a wide range of products, including drill rigs, breakers, crushers, screens, conveyors, drill consumables and turn key plants.

In the construction industry, we are a leading supplier of hydraulic breakers and other attachments, as well as mobile crushing equipment, construction drills and tunnelling equipment.

Throughout Australia, New Zealand and Freeport, we employ approximately 1800 employees, in over 50 strategically located facilities allowing us to deliver the highest levels of service and support.

When it comes to servicing and supporting Sandvik Mining and Sandvik Construction equipment, our highly skilled, factory-trained technicians recognise that our business revolves around our customers. Working out of facilities around Australia, using state-of-the-art workshops and vehicles, our customers rely on Sandvik to deliver quality service and support, backed by our global resources.

Categories
Air Separators

Belt Cleaners

Belts

Blending/Loading Systems

Breakers - Concrete

Buckets & Attachments

Construction Plant & Equipment

Consumables - Blow Bars

Consumables - Ceramic Wear Parts

Consumables - Drilling Related

Consumables - GET

Consumables - Jaw Plates

Consumables - Liners

Consumables - Safe Wear Part Lifting Devices

Consumables - Screens/Wire Mesh

Consumables - Wear Plates

Conveyors/Conveying Equipment

Crushers Plant & Equipment

Demolition Shears

Diamond Drilling

Drilling Rigs

Dust Control Systems

Dust Extraction/Suppression

Education & Training

Exploration & Geophysics

Feeders/Feeding Equipment

Hammers

Loaders

Materials Handling

Mobile Crushers

Mobile Screens

Modular Plant

Plant Design

Recycling

Rollers

Rubber & PVC

Screening Plant & Equipment

Spare Parts

Stackers

Vibratory Equipment


Brands

Quarry
Sandvik
Showroom
Videos
Instagram
Sandvik Coromant
207 19.5K 5.7M
This is the official YouTube Channel of Sandvik Coromant - the world’s leading supplier of tools, tooling solutions and know-how to the metalworking industry. With extensive investments in research and development we create unique innovations and set new productivity standards together with our customers. These include the world's major automotive, aerospace and energy industries.
02:11
PrimeTurning™ – Machining of wheel stub with CoroTurn® Prime Twin tool holder
3/10/2017
Modern multi-task machines are intended for the complete machining of components but typically have a very slow tool changing time. The new CoroTurn® Prime Twin-tool saves you time when changing tools to increase machining utilization and productivity.
5.9K
9
01:02
Demo: Three times higher feed rate with Y-axis parting
5/10/2017
This demo film shows Y-axis parting with CoroCut® QD. This completely new way of parting off gives higher stability and less vibration which allows for much higher feed rates compared to the conventional method. About y-axis parting: Conventional parting off only uses feed motion along the X-axis.
8.7K
21
01:41
CoroMill Plura HF titanium pocketing
4/10/2017
Designed specifically for reliable and productive milling of titanium and nickel based alloys, CoroMill® Plura milling cutters feature two end mills optimized for titanium alloys (one solid and one with internal coolant booster) and one for nickel alloys.
3.7K
0
01:34
CoroDrill 880 CVD diamond-coated insert grades for ISO N machining
4/10/2017
Making holes in aluminium can be a challenging task. CVD diamond-coated insert grades N124 and N134 feature an insert coating with the super-hardness of a real crystalline diamond. Together with chip breaker designs and a unique geometry the inserts guarantee a superior drilling performance.
3.3K
1
01:25
Advanced machining with CoroPlus® tooling solutions
22/09/2017
Connected tooling solutions and process monitoring enable you to leverage data to make the right, fact-based decisions and reach more productive machining. CoroPlus solutions allow you to monitor your machining processes, get real-time insights from within your component and remotly adjust cutting
4.5K
3
01:22
Tool and cutting data recommendation with CoroPlus ToolGuide
7/07/2017
Get a tool recommendation including speeds and feeds based on the task that you are performing. Utilise the connectivity of CoroPlus to import the speeds and feeds into your CAM software or Tool data management system through the click of a button.
4.1K
2
01:27
Creating tool assembly with CoroPlus® ToolLibrary
4/07/2017
Get a tool recommendation including speeds and feeds based on the task that you are performing. Create your tool assembly based on that recommendation. Your tool assembly is based on the ISO 13399 tool data standard and is ready for import to your CAM software.
2.4K
3
01:17
Make the right design and planning decisions with CoroPlus®
3/07/2017
Speed up your decision making and verify the quality of your work in operation and process planning. CoroPlus® ToolGuide gives you tool recommendations and speeds and feeds for a given machining task. Send the tool items to CoroPlus® ToolLibrary for quick and easy tool assembly. All tool data is
3K
2
01:04
Face milling demo with steel workpiece - Sandvik Coromant
27/06/2017
Note: there is a typo in the imperial Q value displayed in the film. The correct value is 31.06 inch³. In this face milling demonstration, CoroMill 745 multi-edge cutter with high feed capability is used for steel machining. The cutter version that is used has a 25 degree entering angle, giving opp
3.3K
5
00:50
Cast iron face milling demo - Sandvik Coromant
27/06/2017
Note: there is a typo in the imperial Q value displayed in the film. The correct value is 54.62 inch³. CoroMill 745 multi-edge cutter with high feed capability is in this demonstration used for face milling in cast iron. The 25 degree entering angle of this cutter version allows for high feed milli
5.3K
0
02:36
Mastercam 2018 connects with CoroPlus ToolLibrary
15/06/2017
The Mastercam 2018 CAM software includes an interface to CoroPlus ToolLibrary. This enables users to search and use simple filter commands to find and select tools from ISO 13399 standard catalogues, says Stas Mylek, Senior Product Marketing at Mastercam. The CAM programmer will be able to create
8.3K
3
00:37
All directional profiling and finishing demo - CoroTurn® Prime A-type
1/06/2017
CoroTurn Prime A-type tool with three 35° corners is designed for light roughing, finishing and profiling giving excellent chip control and significant productivity.
3.5K
0
00:45
All directional rough machining demo - CoroTurn® Prime B-type
1/06/2017
CoroTurn Prime B-type tool with strong corners designed for rough machining offering higher metal removal and significant productivity increase.
5.8K
6
01:17
PrimeTurning™ demo – Turning of pinion in 40 seconds
27/04/2017
In this demo of PrimeTurning™ you will see the complete turning operation of a pinion done in 40 seconds. From roughing to finishing using CoroTurn® Prime B-type and CoroTurn® Prime A-type. The all new turning method allows turning in all directions enabling higher speed, feed and tool life resultin
36.5K
14
01:27
Turning re-invented - PrimeTurning™ and CoroTurn® Prime
3/04/2017
PrimeTurning™ is a new turning methodology which enables turning in all directions. Delivering a 50% increase in productivity or higher compared to conventional turning solutions. This is not just a new tool, it is a totally new way of turning.
165.8K
42
00:31
Turning re-invented by Sandvik Coromant - Teaser
1/03/2017
Turning as you know it will never be the same again. Get a sneak peek at the innovation that will change the way we all look at turning. Visit the Sandvik Coromant website.
19K
23
06:20
How carbide inserts are made by Sandvik Coromant
24/01/2017
Carbide inserts are used to machine almost everything made of metal. The insert has to withstand extreme heat and force, so it’s made of some of the hardest material in the world. We take you to the Sandvik Coromant's world class insert production facility at Gimo, Sweden to witness how an insert
77.2K
53
01:42
Metal cutting in automotive - Improve your production
30/11/2016
The automotive industry and metal cutting is a demanding business. You need to improve your production and reduce your cost per part while maintaining quality. Sandvik Coromant have the expertise and experience to map the processes that will thrust your business forward. We would like to talk to yo
7.1K
4
00:55
Metal Cutting Technology e-learning
12/10/2016
This free university-level e-learning will support you in learning and developing your metalworking skills. The Sandvik Coromant metal cutting technology e-learning is divided into nine chapters and 75 courses. It covers theory and application within the following areas: •Machinability (work piece
5.9K
0
02:16
High performance hard part turning inserts
13/10/2016
When working with hard part material in the transmission industry, you need tools to trust in. The new CB7105 and CB7115 inserts respond to the highest requirements. The grades achieve productive and secure machining with excellent surface finish, more secure edge line and consistent tool life. The
6.4K
5
00:40
Find start values by scanning your tools - Ifind
26/10/2016
Ifind is the app and widget that lets you connect to Sandvik Coromant whenever and wherever you need. Scan your tools to find spare parts, start values and all information you are looking for What do you want to do today? Download the app or visit ifind.sandvikcoromant
3K
1
00:39
Find manufacturing solutions - Ifind
28/09/2016
Sandvik Coromant offers you a powerful search engine online. Finding what you need in your manufacturing has never been easier, through the new Ifind app and widget. What do you want to do today? Download the app or visit ifind.sandvikcoromant -------------- Transcript: You need to find tool inf
2K
0
01:16
Finishing concept for cast iron face milling - CoroMill® 425
26/09/2016
The face milling finishing concept for cast iron - CoroMill® 425 - is designed specifically for the automotive business. The accurate and reliable adjustment system makes CoroMill® 425 the easiest to use system on the market.
7.4K
2
00:59
Sandvik Coromant total online offer - Ifind
9/11/2016
Easily find the tools tailored to your specific machining task, track your orders or learn something new in the metal cutting technology e-learning. It is all available through the new Ifind app and widget. What do you want to do today? Download the app or visit ifind.sandvikcoromant What do yo
1.9K
0
01:32
Connected solutions for digital machining - CoroPlus®
12/09/2016
Digital solutions are transforming the metal cutting industry. Connected cutting tools, machines, software and Internet of Things-devices are changing the manufacturing landscape around the world. To support the implementation of Industry 4.0, Sandvik Coromant offers solutions ready to take you into
15.2K
0
00:40
Find tool recommendations - Ifind
14/09/2016
Ifind is the app and widget that will help you find anything you need in your manufacturing. Get tool recommendations, make purchases, track your order, and even educate yourself. It's all just around the corner. What do you want to do today? Download the app or visit ifind.sandvikcoromant
3.2K
2
03:04
Cane Creek bike components – The Creators by Sandvik Coromant
7/07/2016
At Cane Creek, a high end mountain bike component manufacturer in North Carolina, there is a strong belief in innovation, creativity and that good ideas – not individuals - should win. For Josh Coaplen and his team, developing a rear suspension that allows a rider to push his bike to the limits, mea
5.8K
1
02:00
Milling cutter development - Sandvik Coromant and PCI Tongtai
1/06/2016
Face milling operations in cylinder heads put high demand on surface quality. When developing advanced milling cutters one important success factor is to have strong partnerships based on a shared passion for technology and innovation in the area of metalcutting. PCI is a longtime partner of Sandvik
6.9K
4
02:57
Developing a face milling cutter for aluminum - Passion for innovation
25/05/2016
The face milling cutter for aluminum - M5B90 - is a result of true innovation. Meet one of the engineers behind the development of this unique milling cutter and learn about the passion that went in to creating it. -------- Transcript: The challenge when developing is that it needs to be right f
9.2K
3
03:37
A new approach to milling gears - The Creators by Sandvik Coromant
17/05/2016
Suggesting Invomilling as the approach for machining spur and helical gears is to challenge a technology that has been used and proven for decades. Not something you do every day. But Stefan Scherbath wasn’t content with the status quo. So one day his love of tinkering with new ideas and questioning
12.9K
5