Search Stories by: 
&/or
 

Crushing, Conveying, Maintenance, Screens & Feeders, Processing, Management, Case Studies, Safety

Articles from CRUSHERS PLANT & EQUIPMENT (657 Articles), SCREENING PLANT & EQUIPMENT (583 Articles), FEEDERS/FEEDING EQUIPMENT (305 Articles)












The HP3’s touch screen has simplified the adjustment of crusher parameters.
The HP3’s touch screen has simplified the adjustment of crusher parameters.

High tech investment boosts plant safety, efficiency

An Australian aggregates producer has worked closely with a global crushing supplier to revamp its ageing primary and tertiary plants. As David Leroy explains, both Metso and Boral encountered challenges in the installation of new for old.

Located in the Adelaide suburb of Seacliff Park, Boral’s Linwood Quarry is within one of South Australia’s most important sources of hard rock. Quarrying started there more than 130 years ago, in 1882, when the quarry was opened to supply limestone to the nearby Brighton Cement works. Boral, Australia’s largest building and construction materials supplier, acquired the quarry in 1994. Today Linwood’s operations are focused on providing high quality aggregate, critical in the production of composite materials such as concrete and asphalt.

Linwood is the largest capacity quarry servicing the Adelaide metropolitan area. In recent years the region has seen a flurry of large construction projects, such as Adelaide’s desalination plant, the city’s Northern and Southern expressways and the Royal Adelaide Hospital. As a consequence, the demand for aggregate products has progressively increased, challenging the quarry’s production capabilities. In 2013 site management identified the need to upgrade their crushing and screening plant with the latest technology, to meet this growing demand.

Primary Throughput
Boral has invested in new crushing equipment to better service market demands in the South Australian region.
Boral has invested in new crushing equipment to better service market demands in the South Australian region.

The requirement for new equipment first became evident in the quarry’s primary crushing section.

The plant’s 30-year-old primary jaw crusher was struggling to keep up with production demands, and the machine’s reliability and downtime were affecting overall plant performance. Maintenance costs had risen sharply and the availability of spares had become a problem.

After considering the cost of refurbishing the crusher, Linwood’s management decided investing in a new machine was the best option. Following a detailed analysis of the quarry’s requirements, the team selected Metso’s C140 jaw crusher.

“Minimising the need to modify our existing civils was a key prerequisite for the new machine,” Linwood Quarry manager Andy Baker said.

“Essentially, we needed a modern like-for-like crusher that would fit into the existing footprint, increase throughput and be easy to maintain – Metso’s C140 met all these criteria.”

While improving throughput and reliability was a priority, Linwood’s management also recognised an opportunity to improve site safety. As part of the crusher installation, new walkways and access platforms were designed to improve access to the quarry’s primary crushing station. 

Once the C140 was installed, the crusher’s performance and reliability significantly improved product quality and throughput.

The new machine’s ability to deliver more consistent output also immediately reduced the load and wear rates in other key areas of the plant.

Where personnel previously needed to constantly monitor the crusher to ensure a consistent product output size, this was now an automated process. Baker said: “Now we can simply program the gap setting and be confident about what product we are going to get. The C140’s hydraulic adjustment provides a massive advantage for us in terms of overall efficiency and safety. It eliminates manual adjustments and associated hazards. This saves us time and keeps our production rates up.”

The plant’s primary crusher upgrade represented a big change for quarry staff, as it brought the latest technology to the primary crushing process in the form of advanced automation and safety.

Boral project manager Santanu Ghosal (centre) oversees cable installation for the new crushers.
Boral project manager Santanu Ghosal (centre) oversees cable installation for the new crushers.

Metso’s area manager Andy Gough says post-commissioning support was very important to ensure a smooth transition.

“The new machine offered many benefits, however, it was a significant change for the site,” he said. “We worked hard to maintain a presence at the quarry post commissioning, offering a comprehensive range of support services during this critical period.”

Tertiary Crushing Quality

Shortly after the new crusher was installed in 2014, its increased production capacity shifted the site’s bottleneck to the tertiary crushing circuit.

Tertiary crushing involves further reducing aggregate in size, while shaping it into final end products. While it is important to keep up with upstream feed rates, high precision is required to ensure the right product shape. Linwood had two cone crushers responsible for this task, which were nearing the end of their effective service life.

By weight and volume, cubically shaped aggregate is characteristically much stronger than flatter, elongated material. A problem with the crushers was their inability to reliably produce aggregate that met the required index of elongation and flakiness. To get the right shape, operators had to recirculate the output product through the crushers and/or channel it for additional screening and polishing. Recirculation required additional processing time, which could have been utilised producing new feed material.

Another method employed by the quarry’s team to improve shape was to set the crushers with tighter closed-side settings.

This increased downstream plant load, causing the screens and conveyors to use more energy or become overloaded.

Running the crushers longer also increased machine wear and energy consumption, and reduced overall production rates.

With output quality so heavily dependent on operator intervention, another problem was the constant risk of end-product stockpiles being contaminated with inferior product. The combination of these inefficiencies meant there was also less yield per unit of feed.

Aggregate shape was an ongoing issue in the tertiary circuit.
Aggregate shape was an ongoing issue in the tertiary circuit.

Site management considered replacing the tertiary cone crushers with units from Boral’s extensive install base. Eventually, the team decided the installation of two new machines would provide the best solution.

After an exhaustive selection process taking account of all the quarry’s requirements, in 2015 Metso was awarded with a contract to supply two HP3 cone crushers.

Latest Technology

When Linwood first compared the Metso HP3’s specifications with its existing crushers, it was a challenge to reconcile their performance and operating requirements.

One of the first things the team noticed was how different the crusher’s size, power and capacity were. The HP3’s design was physically smaller than the old crushers, yet Metso claimed the machines had a 20 per cent higher throughput capacity and could produce a higher precision product with one-pass production.

According to Peter Small, Metso’s capital sales manager, a number of factors allow the HP3 to outperform similar sized machines. He says while automation with integrated control is an important factor, it is the efficiency of the crushing process that makes the biggest difference.

“The HP3’s efficiency is derived from a design that increases the concentration of aggregate inside the crusher,” he said. “It applies more crushing force and relies on a greater degree of inter-particle crushing.

“Getting these elements to work relies on complex calculations and detailed analysis of process variables, feed material characteristics and final product specification.”

Small says an essential part of Metso’s crushing solution is Bruno, the company’s crushing and screening simulation software tool. Bruno calculates and tests process models based on empirical crushing and screening expertise. “Being able to demonstrate the capabilities of alternate configurations and designs gives our customers great confidence in the equipment and the designs we propose,” he said.

Unchartered Waters

When Linwood needed to select its new crushers, the HP3 had just been released. There weren’t any of these machines operating in Australia, which meant Linwood’s decision-makers couldn’t call upon the experiences of their usual references within Boral or the broader quarrying community. The availability of spares for the first and only units in Australia was also a concern.

Linwood recognised that the next generation HP3 offered many benefits. The technology would future proof the site’s tertiary circuit and enable the wider integration of automation across the entire plant.

Santanu Ghosal, Linwood’s project manager, said: “The benefits were clear to us, but choosing the HP3s was still a leap of faith. Ultimately, I think it was the confidence and expertise of Metso’s people that gave us the assurance we needed. We had access to a very responsive team of local and international experts; and had enjoyed great post-sales support with our C140 primary crusher.”

Baker says Metso’s local and global support network was a significant factor in Linwood’s decision-making process.

“The support we received helped us to fully explore and understand the options and benefits the HP3s could offer, specific to our situation,” he said. “For me, a key differentiating factor was the integrated control and automated operation of the HP3s – we knew this was the single biggest technology step towards improving our product quality and efficiency.”

Installation Challenges

Replacing the old crushers with the HP3s was always going to be a challenge while maintaining aggregate production rates at the quarry.

From an electrical point of view, the HP3’s larger motor required new mounting and cabling arrangements from the crusher through to the switch room. The mechanical work included installing new cooling units and a bigger stand-alone lubrication system. A redesign of the feeder to a new location was also required.

Alongside this work were the site’s safety improvements, which included extended platforms and improved working areas.

The team estimated that the electrical and mechanical upgrades would take the tertiary crushing station offline for at least 17 days.

A HP3 cone crusher. Image courtesy: AggMan.com.
A HP3 cone crusher. Image courtesy: AggMan.com.

This made timing of the installation a critical consideration. Linwood’s management originally considered performing the installation over Christmas, but were concerned about the availability of personnel, parts and materials during this period.

While management planned to stockpile product in preparation for the installation, at the same time they had major projects to supply and knew their reserves wouldn’t last 17 days. To help mitigate the loss of production, a trailer-mounted cone crusher and screen was refurbished to supplement supply while the main plant was offline. Performance and efficiency were not optimal, but the mobile station closed the gap in production while installation and commissioning was in progress.

Leap Forward

During the selection process, a high degree of automation was considered a requirement for the site.

With the new HP3s installed, feedback from the quarry’s operators has been particularly centred on this aspect. The HP3’s touch-screen interface allows operators to have quick and easy access to troubleshooting, throughput and motor current information. Mechanical settings, which previously had to be manually adjusted, are now performed in a matter of seconds via the machine’s touch screen.

The productivity benefits and the elimination of safety risks involved in manual adjustments have made these features very popular with site operational staff.

Stray metallic objects – called tramp iron – that enter the crusher can stall and even damage the machine. The HP3’s innovative tramp release system with dual-acting hydraulic cylinders and fixed return point lets the crusher easily eject tramp iron. If the crusher stops under load, the dual-acting hydraulic cylinders provide a powerful stroke that clears the crushing cavity. In both instances, the crusher’s settings are instantaneously restored without the need for operator intervention.

The HP3’s liner fastening system doesn’t require the backing material that is common with other crushers. When liners are changed or reconfigured, hydraulic motors rotate the bowl completely out of the adjustment ring threads. These two innovations save a lot of time and labour.

The Big Difference

The upgrades to Linwood’s crushing circuit have improved the site’s production capabilities and modernised its crushing process.

Baker believes the site is now capable of producing more, while maintaining high product quality and improving safety.

“The throughput we are getting has surpassed our expectations,” he said. “Our ongoing maintenance costs have come down, while the automation and access platform upgrades have improved plant safety. Overall, we can now more reliably meet market demands for our key specification products.”

Commenting on Linwood’s successful application of new crushing technology, Metso’s vice-president for aggregates Shaun Fanning highlights the importance of the project.

“We are extremely happy to support Boral’s long-term growth plans through such an important project for the Linwood site,” he said. “We strive to make the big difference by offering quality equipment and supporting our customers with an extensive program of post-commissioning services to ensure many years of machine reliability,” he said.


David Leroy is the Australasian marketing co-ordinator for Metso.




















Friday, 22 June, 2018 12:11am
login to my account
Username: Password:
Free Sign Up

Receive FREE newsletter and alerts


CONNECT WITH US
Display ad standard
advertisement
standardlarge_0718_GraysOnline
advertisement
standardlarge_0618
advertisement